Radial oriented ring magnet• Maximum outside diameter is 60 mm
• Minimum inside diameter is 20 mm
• Maximum wall thickness is 7 mm
• Minimum wall thickness is 2 mm
• Maximum length is 25mm (for small thickness �C 15)
• Tolerances: mostly +/- 0.1 mm
Predominance
Surface treatment:
These magnets can be covered by any available coatings like usual two-pole magnets (NiCuNi, Ni, Zn, epoxy etc.
Performance
Radial oriented ring magnet
It changed the situation of assemble tegular magnet as ring in sinter NdFeB magnet scope as before,
it also improde the property of ring magnet, and realized perfect situation.
MAGNETC has applied for a patent in the fabrication process of its Radial NdFeb Sintered Ring Magnet. The technology that was applied to this product is considered to be the most advanced Korean technology in this year's show. Comparing to radial ring ND magnets, segment neodymium magnets are more complicated to attach. This makes them cost more and have more chances to show lower precision and to be displaced. However, radial ring magnets have lower per-unit cost and excellent precision due to the simple shape and fabrication process. Also, it offers a variety of magnetic configuration and angles, and FLAX is spread even horizontally and vertically. Sizes of the product can be customized: a maximum outside diameter, 150mm; minimum inside diameter, 10mm; maximum wall thickness, 2mm; maximum length, 50mm. The surface is covered with Ni, Zn, and epoxy and the grade of magnesium ranges 35 to 50 MGOe.